Buckets - ForkliftTurn your forklift into a loader!
This Forklift Self-Dump Buckets from Star Industries installs in minutes and is the ideal solution for loading loose stuff. No adjustment to the forklift is required. A hydraulic dump selection is also available.Manual Self-Dump Buckets
No changes or hydraulics are required. Simply slide the bucket on the forks and inject the pins to lock it on. The bucket can be released with the handle at the back of the bucket or through the seat of the operator with the remote rope release. Decreasing the bucket to the ground resets the bucket for the following load. The safety lock stops accidental tripping of the bucket release throughout transport.
Hydraulic Self-Dump Buckets
The Hydraulic self-dump bucket presents precise control of the flow. Hydraulic flow from the forklift is needed (hydraulic control valve not included). If the forklift is packed with a hydraulic side shift, flow from that valve can typically be redirected to the bucket cylinder.
Slip-on-forks
Designed for 48 inches forks
The universal, slip-on-the-fork model can be utilized with any make and model of extendable-reach forklift that is equipped with standard 48 inch long forks. The bucket skids onto the forks and is secured with pins back the heel. Because the carriage and forks remain on the forklift, there is a lesser chance of loss or damage to the forks. This design highlights a deeper bucket, making the transport of irregular-shaped loads easier.- Accepts forks up to 7 inches wide x 2 ½ inches thick x 48 inches long
- The positive locking method keeps the bucket secured to forks
- Chain & Grab Hook wraps throughout the carriage as a secondary safety measure
- Bucket approx. 51 inches deep
Manual Self-Dump Buckets
Hydraulic Self-Dump Buckets
* Specify length, thickness and width of forks when ordering
Bucket in Dump Position
Applies to Manual and Hydraulic 